Update Bios Intel Server Board

Hello Kids,

Today i want to share about update bios on intel server board, first note it should be update offline using USB disk. The USB disk should be in fat32 or fat64 format.

This time we use EFI shell, EFI shell is shell in your bios, it could be accessed from your bios > boot manager > EFI shell.

Before that you should prepare your USB disk with the firmware upgrade using EFI. You could download it here. extract it and copy to you USB disk.

Once you entered EFI Shell, you could check where the USB disk reside using map -r command. usually it detect as fs1.

Change to fs1 directory >> fs: | check your directory >> dir | and run Startup.nsh

Voila your firmware has been updated.

After that  you could update FRU and SDR .Field Replacement Unit (FRU) to choose chipset if you buy using specific vendor and Sensor Data Record (SDR) to detect if there are an update in you board. 

You should run the FRUSDR load utility each time you upgrade or replace the hardware in your server, excluding add-in boards, hard drives, and RAM. For example, if you replace an array of fans, you need to run the utility. It programs the sensors that need to be monitored for server management.

Your Dad,